Compaq Memory Channel Hub - Manual (Page 3)

iii
Table of Contents
1 Introduction
1.1 Overview .......................................................................................................... 1–1
1.2 Components and Controls ................................................................................. 1–1
1.2.1 Front Components ................................................................................... 1–1
1.2.2 Operator Control Panel............................................................................ 1–3
1.2.3 Internal Components ............................................................................... 1–4
1.2.4 Rear Components .................................................................................... 1–4
1.3 Specifications.................................................................................................... 1–5
2 Installation
2.1 General ............................................................................................................. 2–1
2.2 Site Preparation................................................................................................. 2–1
2.3 Unpacking the Shipment ................................................................................... 2–2
2.4 Installing the 2T-CCMHA-CB Central Office Memory Channel Hub................ 2–4
2.4.1 Determining the Installation Area............................................................ 2–4
2.4.2 Attaching the Slide Assemblies to the Cabinet Rails................................ 2–6
2.4.2.1 Attaching the Right Slide Assembly to the Cabinet Rails............... 2–6
2.4.2.2 Attaching the Left Slide Assembly to the Cabinet Rails................. 2–7
2.4.3 Attaching the Inner Races to the Tray ..................................................... 2–9
2.4.4 Mounting the Memory Channel Hub, Front Bezel, and Interlock Actuator
Bracket on the Tray ..................................................................................... 2–10
2.4.5 Mounting the Chassis and Tray Assembly on the Slides ........................ 2–12
2.5 Installing the Interlock System ....................................................................... 2–14