1 user is idle, 2 location's host is available, 3 fits the time interval – Acronis Backup for Windows Server Essentials - User Guide User Manual

Page 93

Advertising
background image

93

Copyright © Acronis International GmbH, 2002-2014

4.4.6.1

User is idle

Applies to: Windows

"User is idle" means that a screen saver is running on the managed machine or the machine is locked.

Example:

Run the backup task on the managed machine every day at 9PM, preferably when the user is idle. If
the user is still active by 11PM, run the task anyway.

Event: Daily, every 1 day(s); Once at: 09:00:00 PM.

Condition: User is idle.

Task start conditions: Wait until the conditions are met, Run the task anyway after 2 hour(s).

As a result,

(1) If the user becomes idle before 9PM, the backup task will start at 9PM.

(2) If the user becomes idle between 9PM and 11PM, the backup task will start immediately after the
user becomes idle.

(3) If the user is still active at 11PM, the backup task starts anyway.

4.4.6.2

Location's host is available

Applies to: Windows, Linux

"Location's host is available" means that the machine hosting the destination for storing archives on
a networked drive is available.

Example:

Backing up data to the networked location is performed on workdays at 9:00 PM. If the location's
host is not available at that moment (for instance, due to maintenance work), skip the backup and
wait for the next workday to start the task. It is assumed that the backup task should not be started
at all rather than failed.

Event: Weekly, Every 1 week(s) on <workdays>; Once at 09:00:00 PM.

Condition: Location's host is available

Task start conditions: Skip the task execution.

As a result,

(1) If 9:00 PM comes and the location's host is available, the backup task starts right on time.

(2) If 9:00 PM comes but the host is unavailable at the moment, the backup task will start on the next
workday if the location's host is available.

(3) If the location's host will never be available on workdays at 9:00 PM, the task never starts.

4.4.6.3

Fits the time interval

Applies to: Windows, Linux

Restricts a backup task's start time to a specified interval.

Advertising
This manual is related to the following products: