Acronis Backup for Windows Server Essentials - User Guide - Manual (Page 114)

114 Copyright © Acronis International GmbH, 2002-2014
a. From – type the name of the sender. If you leave this field empty, the messages will contain
the sender's e-mail account in the From field.
b. Use encryption – you can opt for encrypted connection to the mail server. SSL and TLS
encryption types are available for selection.
c. Some Internet service providers require authentication on the incoming mail server before
being allowed to send something. If this is your case, select the Log on to incoming mail
server check box to enable a POP server and to set up its settings:

Incoming mail server (POP) – enter the name of the POP server.

Port – set the port of the POP server. By default, the port is set to 110.

User name and Password of the incoming mail server.
d. Click OK.
10. Click Send test e-mail message to check whether e-mail notifications work correctly with the
specified settings.
4.7.9 Error handling
These options are effective for Windows and Linux operating systems and bootable media.
These options enable you to specify how to handle errors that might occur during backup.
Do not show messages and dialogs while processing (silent mode)
The preset is: Disabled.
With the silent mode enabled, the program will automatically handle situations requiring user
interaction (except for handling bad sectors, which is defined as a separate option). If an operation
cannot continue without user interaction, it will fail. Details of the operation, including errors, if any,
can be found in the operation log.
Re-attempt, if an error occurs
The preset is: Enabled. Number of attempts: 30. Interval between attempts: 30 seconds.
When a recoverable error occurs, the program re-attempts to perform the unsuccessful operation.
You can set the time interval and the number of attempts. The attempts will be stopped as soon as
the operation succeeds OR the specified number of attempts are performed, depending on which
comes first.
For example, if the backup destination on the network becomes unavailable or not reachable, the
program will attempt to reach the destination every 30 seconds, but no more than 5 times. The
attempts will be stopped as soon as the connection is resumed OR the specified number of attempts
is performed, depending on which comes first.
If Acronis Cloud Storage is selected as the primary, the second, or a further backup location, the option value is
automatically set to Enabled. Number of attempts: 300, regardless of the default value.
Ignore bad sectors
The preset is: Disabled.
When the option is disabled, the program will display a pop-up window each time it comes across a
bad sector and ask for a user decision as to whether to continue or stop the backup procedure. In
order to back up the valid information on a rapidly dying disk, enable ignoring bad sectors. The rest