Casio TC-520 - Manual (Page 18)

23 23 23 23 23
PAGE
AUTODIAL WITH
VOICE CHECK
You may store up to 10 of your most frequently
dialed numbers in autodial memory. Autodial
numbers can be up to 15 digits each. The base
unit must be connected to the electrical wall
outlet with the AC Adapter and the Talk Indicator
must be off.
2
Enter one of the telephone numbers you
want to store in the autodial memory by
dialing it on the keypad. You will hear a
confirmation tone each time you press a
button.
6 The TC-520 will automatically exit the
autodial program mode.
NOTE: If you do not
press a key, the unit will exit the programming mode
7 seconds after the last command was entered.
5
Continue steps 1-4 until you have entered
all your autodial numbers.
3
Press MEMORY .
4 Press a keypad number (0-9) as the
autodial location for that number. A
synthesized voice will confirm your stored
number.
AUTODIAL
VOLUME MEMORY FLASH FLASH
MEMO CONV
LO BATT
PLAY
MESSAGE
4 GHI
7 PRS
1
5 JKL 6 MNO
3 DEF 2 ABC
8 TUV 9 WXY
0 OPER * #
FAST FWD REWIND
TONE
CHANNEL REDIAL (PAUSE)
HOLD SCREEN
REMOTE
TALK
ERASE SAVE
PAGE
1
Press MEMORY . You will hear a
confirmation tone.
MEMORY
5
JKL 1 5
JKL
1
551-1111
HANDSET
AUTODIAL MEMORY
BACKUP
CASIO PHONEMATE's memory back up system
in the base unit maintains autodial numbers for
up to 3 minutes with no
batteries installed. If you
want to relocate the base
unit, unplug the AC Adapter
from the wall outlet. If you
unplug the AC Adapter
Plug from the base unit,
you will lose all autodial
memory.