Microcassette & battery installation – Casio TC-520 User Manual

Page 9

Advertising
background image

32

32

32

32

32

PAGE

Red Wire

Black Wire

REMOVING/REPLACING

MICROCASSETTE

If it becomes necessary to remove or replace
the microcassette be sure to play messages
first.

1

Gently lift the tape out from the left side.

2

INSTALL

a new microcassette.

BATTERY

INSTALLATION

THIS UNIT IS SHIPPED WITH THE
HANDSET BATTERY PACK
INSTALLED.

4

3

Press

ON/OFF

to turn the machine on.

RE-RECORD

your outgoing message

(see page 6).

If it becomes necessary to replace the battery
pack:

1

Press down on the battery compartment
cover and slide it toward the bottom of the
handset.

2

Install the new battery pack with the red
wire on the right side of the black wire
(see drawing.)

3

Replace the battery cover by sliding it up
from the bottom.

4

Place the handset in the base unit and
charge the battery pack for 12-15 hours.

WARNING: Use only NiCad
Rechargeable Battery Pack
(3.6 volts 250 - 300 mAh.)

MICROCASSETTE &
BATTERY INSTALLATION

GENERAL

Advertising