Casio TC-520 - Manual (Page 21)

20 20 20 20 20
PAGE
TELEPHONE OPERATION
ALARM
The TC-520 cordless
handset operates like any
other telephone handset.
You can use it in the yard,
at the pool, at the
mailbox, or any place
within the operating range
of the base unit. If you
move out of the base
unit's operating range, you
will hear a warning tone.
Move closer to the base
unit to deactivate the
alarm. If you remain out of
range for too long, the
TC-520 will disconnect
from the line.
HANDSET
MEMO CONV
LO BATT
PLAY
MESSAGE
1 3 DEF 2 ABC
HOLD SCREEN
REMOTE
TALK
If the handset loses its security code you will
also hear an alarm tone. To reset this security
code place the handset in the base unit for a few
seconds. Pick up the handset and try your call
again.
Interference from other appliances may also
cause the alarm to sound. To prevent
interference, move the base unit to another
location and fully extend the base unit antenna.
When the handset is in the TALK mode and is
returned to the base unit, it will automatically
return to the “Standby” mode and disconnect the
call. It is not necessary to press
TALK to
disconnect the call. In the "Standby Mode" the
INDICATORS will not be lit.
STANDBY MODE
TO PLACE A CALL
1
Pick up the handset and press TALK .
TALK
2 Wait for dial tone and dial the phone
number.
NOTE: The CHARGING/LINE IN-USE
INDICATOR on the base lights to show the handset
is in use.
3
To hang up, press TALK or return the
handset to the base unit. NOTE: When you
return the handset to the base unit, you are hanging
up the phone (Standby Mode.) The TC-520 is now
ready to receive a call and the Charging/Line In-Use
Indicator lights to show the battery is charging.