FRIGIDAIRE FGFU19F6QF - Manual (Page 7)

7
Leveling Door with Adjustable Hinge
Use the lower hinge adjustment to fine tune the
door height and for final cabinet spacing. Use a
7/16” socket or wrench to adjust the screw at the
bottom of the lower hinge.
Adjusting Doors for Matching Tall
Refrigerator/Freezer Pair
The doors may also be adjusted side to side with
the slotted hinge for aligning the doors parallel
to each other. Loosen the two bolts with a 3/8”
wrench and one screw with a Phillips screwdriver.
Shift the doors until parallel, then retighten the
screw and bolts securely. (See illustration below.)
Lower Hinge Adjustment for Leveling the
Doors of the Matching Tall Refrigerator/
Freezer Pair
To level the doors using the adjustable lower
hinge (some models):
1. If the refrigerator door is lower than the
freezer door, raise the refrigerator door by
turning the adjustment screw clockwise
using a 7/16” socket wrench. (See
illustration below.)
2. If the freezer door is lower than the
refrigerator door, raise the freezer door by
turning the adjustment screw clockwise
using a 7/16” socket wrench. (See
illustration below.)
Door
Raise
Door
Raise
Door
Slotted Hinge
Adjustment
⅜” bolts
Freezer Refrigerator
Screw
Door
To install the shelf grommet to the shelf:
1. With the wire shelf installed, press the
shelf grommet down onto the wire that is
anchored into the freezer wall. Be sure to
keep the larger end of the shelf grommet
away from the wall.
2. Push the shelf grommet onto the wire until
it snaps in place.
3. Slide the shelf grommet into the grommet
already in the freezer wall until it is flush.
INSTALLATION