Electronic control, Setting the pro-select™ electronic control, Pro-select™ electronic control features – FRIGIDAIRE FGFU19F6QF User Manual

Page 9

Advertising
background image

9

°F

Setting the PRO-SELECT™ Electronic Control

Cool Down Period
For safe food storage, allow 4 hours for the appliance to cool down completely. The unit will run

continuously for the first several hours.
Pro-Select™ Electronic Control
The Pro-Select™ Electronic Control is located inside the appliance. Temperature is factory preset to

provide satisfactory food storage temperatures. However, the temperature control is adjustable to

provide a range of temperatures for your personal satisfaction.

PRO-SELECT™ Electronic Control Features

Replace Air Filter
When the “REPLACE AIR FILTER” LED is illuminated yellow, the air filter needs to be replaced. The

control will signal for air filter replacement after 3600 hours of refrigerator operation. After replacing

the air filter, reset the air filter timer by pressing the AIR FILTER key for 3 seconds. The “REPLACE

AIR FILTER” LED will be illuminated green for 3 seconds, confirming a timer reset.

°F

ELECTRONIC CONTROL

To adjust the temperature setting, press the UP () key for warmer temperature and DOWN ()

key for colder temperature on the control panel. Allow several hours for the temperature to stabilize

between adjustments. The unit can be adjusted between -10°F (-23°C) and 10°F (-12°C). By

pressing the TEMP MODE key, the temperature display will toggle between °F and °C.

To turn the appliance OFF, press the UP () key until the warmest temperature setting of 10°F

(-12°C) shows in the display. Then press the UP () key 3 times within 3 seconds to turn the unit

OFF. The display will then show “OF”. To turn the unit back ON, press the DOWN () key 3

times within 3 seconds. The control will then display “10°F (-12°C)” and may be adjusted to the

desired temperature.

Control Lock
To disable the keypads on the control, begin by pressing the CONTROL LOCK key for 3 seconds until

“LO” is displayed for 1 second. With the control locked, when keys are pressed on the control panel,

“LO” will be displayed. To unlock the control, press the CONTROL LOCK key for 3 seconds. The

display will show “UL” for 1 second.

°F

Advertising
This manual is related to the following products: