AAXA Technologies M2 - Manual (Page 27)

Troubleshooting
27
THE PROJECTOR DOES NOT TURN ON
Possible Causes Solution
There is no power Check to ensure the power outlet or
battery source is good. Check the
power adapter to ensure a proper
connection with the wall outlet as
well as the projector. Confirm that
the unit is charged and has enough
power.
NO PICTURE / FILE NOT SUPPORTED
Possible Causes Solution
The video source is not properly Check the video source signal to
connected or selected ensure that it is properly connected.
Select the correct input source by
choosing the input desired from the
main menu.
Incorrect file extension / Video is Please refer to “Specifications” page
encoded with incorrect codec to see which file types and codecs
are supported. Verify that the file
was encoded properly.
IMAGE IS BLURRED
Possible Causes Solution
The projector is not in focus Adjust the focus with the focus
adjustment dial until the image
comes into focus.
Image appears stretched when Verify the output setting on device
connected to an external device is configured to 4:3 aspect ratio