AAXA Technologies M2 - Manual (Page 7)

General Operation
Accessing the Onboard Memory
The M2 Micro Projector includes 1GB of
onboard memory. To access this memory,
connect a USB cable from your computer
to the back of the projector in the slot that
reads “USB”. A folder will appear on your
computer screen after the projector is
detected. You can store any type of supported photos, video and/or files in
this folder to view.
Note: If your computer fails to detect the projector, check to make sure the
cable is securely inserted on both sides. If you’re still unable to view the
folder, please consult with your operating system’s owner manual.
Accessing a SD Memory Card
Multimedia file can also be accessed via
an SD memory card. To access your SD
card, insert it into the back of the projector
in the slot that reads “SD”. Once your SD
card has been inserted, you can navigate
through the main menu to select what you
want to view under each submenu.
*Review the Specifications section of this manual to read about supported file
formats.
7