Canon LV-7585 - Manual (Page 21)

21
RGB Scart
21-pin Output
Connecting to Video Equipment (Video, S-Video)
S-video
cable
S-video
Output Composite Video
Y - Pb/Cb - Pr/Cr
BNC
cable
Unplug the power cords
of both the projector
and external equipment
from the AC outlet before
connecting cables.
Cables used for connection ( = = Cables not supplied with this projector.)
• Video Cable (RCA x 1 or RCA x 3) =
• BNC Cable =
• S-VIDEO Cable =
• Scart-VGA Cable =
Component Video
Output Composite Video
Component Video
Output
(Y, Pb/Cb, Cr/Pr)
Digital Output
(HDCP
compatible)
RCA
cable DVI-Digital
cable
Scart-VGA
cable
Video Video Y - Pb/Cb - Pr/Cr DIGITAL IN ANALOG IN MONITOR OUT S-VIDEO
Installation
Input Terminal Monitor Out Cable
Input 1
D-sub15
RGB (PC analog) YES
RGB (SCART) NO
DVI-D
RGB (PC digital) NO
RGB (AV HDCP) NO
Input 2 5BNC
RGB YES
Video YES 1
Y, Cb/Cr YES 1
Input 3
RCA Y, Cb/Cr YES 1
S-Video S-video NO
Video Video YES 1
Network NO
Monitor Out Signal Table
Refer to the
Monitor Out
Signal Table
(above).
1
A cable with one
end D-sub 15 and
the other end (Black
box) compatible with
each equipment is
necessary.