Canon LV-7585 - Manual (Page 28)

28
Operating with Remote Control Unit
Using the remote control unit for some frequently used operations is advisable. Just pressing one of the
buttons enables you to make the desired operation quickly without calling up the On-Screen Menu.
Press the FREEZE button on the remote control unit to
freeze the picture on the screen. To cancel the FREEZE
function, press the FREEZE button again or press any other
button.
FREEZE button
Press the AUTO PC button on the remote control unit to
operate the Auto PC Adj. function. The computer screen
adjustment can be done easily by pressing this button. See
page 35 for details.
AUTO PC button
Press the D-ZOOM button on the remote control unit to
enter to the Digital zoom +/– mode. See page 40 for details.
D-ZOOM button
Press the ASPECT button on the remote control unit to
select the desired screen size. The selected screen size
symbol appears on the screen for 4 seconds. See pages 39
to 40 and 43 to 44 for details.
Press and hold the ASPECT button for more than 5 seconds
to return all the screen size adjustment setting to the factory
default setting.
ASPECT button
Press the ZOOM buttons on the remote control unit to zoom
in and out the image.
ZOOM buttons
Press the FOCUS buttons on the remote control unit to
adjust focus of the image.
FOCUS buttons
See page 27 for details.
LENS-SHIFT button
Remote Control Unit
D-ZOOM
button
INFO.
button
POINT ! 
buttons
FREEZE button
AUTO PC
button
ASPECT button
ZOOM
buttons
FOCUS
buttons
LENS-SHIFT
button
 Note:
• See the next page for the description
of other buttons.
Information display can be used to confirm the current
operating condition of the projector and the signal being
projected through the projector.
Press the INFO. button on the remote control unit to
display the information window on the screen. To hide the
information window, press the INFO. button again or Point

buttons.
The information window can also be selected from the
menu.
INFO. button
Information Menu
Information Menu
* The H- and V-sync freq. values described in this figure
may be different from the actual values.
Basic Operation