Compaq iP-40 - Manual (Page 34)

E-
Regular Operation
Operation with the Projector
Volume adjustment cannot be made at the operation
panel of the projector.
Operation with the Remote Control
Adjust using the VOLUME (+/-) buttons.
Volume adjustment bar
Transferring Captured Images *
When connection is made with a USB
cable, history images can be transferred to
the personal computer.
Operation with the Projector
When the input is set to PC/component video:
Press the TRANSFER button.
When input set to OHP: Long-press the TRANS-
FER button.
Operation with the Remote Control
When the input is set to PC/component video:
Press the ROTATION button.
When the input is set to OHP: Use the input selec-
tor to select PC, then press the ROTATION button.
ON/STANDBY
LAMP/COVER
TEMP
FREEZE OFF FREEZE /CAPTURE ROTATION INPUT
TRANSFER
NOTE:
• Please see the attached “iP Viewer Program Quick Reference” or the “iP Viewer Software Program Operating Instruc-
tions” for information about the iP Viewer operation method.
• Once transferred, the images stored in the history are deleted.
・ The image cannot be transferred when the SD memory card has been inserted.
* This function is only available on the iP-40SE.
Adjusting the Volume
Effective only During PC and VIDEO Input
NOTE: If no operation is performed for several seconds while the volume adjustment bar is displayed, the volume adjustment
bar turns off.