Century PM-1026AB - Manual (Page 24)

Place base rear-facing on vehicle seat.
Thread vehicle lap belt through base belt Tabs
and buckle belt.
NOTE: Vehicle shoulder belt must NOT be
placed under belt Tabs.
Press down firmly on base to compress vehicle
seat cushion while tightening vehicle lap belt
(fig. a).
Pull front to back and left to right to check for
secure installation (fig. b).
If not secure, see “Vehicle Seat Belts” section.
Put car seat in base and pull up on car seat to
be sure it is locked in base.
Ball MUST be in green zone (fig. c). If
necessary adjust Foot (if available)
or place rolled towels under
base at vehicle seat crease.
NOTE: Vehicle must be on
level ground and child in
car seat when leveling.
Adjust handle to a position
behind car seat.
INSTALLATION WITH BASE
1
3
4
5
2
6
6
(fig. a) (fig. b) (fig. c)
Tabs
7
Foot