Century PM-1026AB - Manual (Page 6)

5
Attach appropriate snaps to
secure car seat to stroller:
NOTE: Use of proper snaps
provide the snuggest
attachment to stroller frame.
1
Set both rear brakes to prevent
stroller from moving.
2
Position arm bar in up position:
• Rotate arm bar over lower
edge of seat.
• Push arm bar into slots.
• Pull on arm bar to be sure
it is securely locked.
1
LOCKING:
Push down on both brake
levers.
2 UNLOCKING:
Push up on both brake levers.
CAR SEAT/STROLLER USE
Locking Or Unlocking Rear Wheels
5
Attaching Car Seat
3 Position stroller back support
in reclined position:
Squeeze both levers on sides
of seat back to release.
4
With car seat handle in locked carrying position (upright)
insert car seat adapter Tongue into arm bar Slot.
NOTE:
• Before attaching car seat, be sure to remove tongue of
child’s tray pad by pulling out red button and pulling
up on child’s tray pad.
• Car seat may be placed in child’s tray slot either
rear-facing or forward-facing.
Rear-facing Forward-facing
Tongue
Slot
Tongue
Slot
Forward-facing
Snap
Rear-facing
Snap