Century PM-1026AB - Manual (Page 30)

OPERATIONS and ADJUSTMENTS continued
12
Changing Harness Strap Slots (fig. d):
Harness straps must be through slots at or just
below shoulders.
• Press Tab to release metal Rod and lift Rod
out of side Pockets.
• Slide metal Rod out of Loops of harness
straps.
• Pull harness strap out of current Slots and
thread through desired Slots.
IMPORTANT: Straps MUST be through
matching Slots of seat pad and car seat.
• Adjust strap length by inserting metal Rod
into any Loop that will provide proper
snugness.
• Replace metal Rod into side Pockets and
slide Rod down below Tab.
Make sure Tab holds metal Rod secure ly.
Changing Crotch Strap Positions (fig. e):
5-Point Models Only
• From bottom of car seat, remove crotch
strap Clip.
• From top of car seat, rethread crotch strap
through desired Opening.
• Re-attach crotch strap Clip exactly as
shown.
Pull on buckle to make sure it is held
securely
.
7 6