Cuisinart Smart Stick CSB-77 - Manual (Page 13)

13
CHOPPER/gRINDER ATTACHMENT
To simplify cleaning, rinse the prep bowl, cover, and blade immediately
after use, so that food won’t dry onto them. Wash blade ring, plastic
sheath, and prep bowl in warm soapy water. Rinse and dry. Wipe the
underside of the chopper/grinder cover with a sponge or damp cloth
to remove any food. Do not submerge the cover in water or put in
the dishwasher. Wash the blade carefully. Avoid leaving it in soapy
water where it could disappear from sight.
If you have a dishwasher, you can wash the prep bowl blade assembly
on the upper shelf. Insert the prep bowl upside down. Put the blade
in the cutlery basket. Unload the dishwasher carefully to avoid contact
with the sharp blade. Wipe the motor body and top of the cover with
a damp sponge or cloth. Dry it immediately. Never submerge the
motor body or the cover in water or other liquid.
The Smart Stick
® chopper/grinder attachment is intended for
HOUSEHOLD USE ONLY. Any service, other than cleaning and normal
user maintenance, should be performed by an authorized Cuisinart
Service Representative.
WHISK ATTACHMENT
To clean your whisk attachment, simply release the attachment
from the motor body housing. Once the whisk is removed, detach
the metal whisk from the gearbox by pulling pieces apart.
To clean the gearbox, simply wipe with a damp cloth.
To clean the metal whisk, wash with warm, soapy water or in the
dishwasher.
Do not submerge the gearbox in water or any other liquid.