Corinex Global ETS 300-826 - Manual (Page 19)

16
Configuration
Corinex Wireless G USB Mini Adapter
This window is divided into four sections – General, Encryption, Profile and
Other.
3.1.1 General
This section shows the general wireless settings of the current connection. If you
want to change anything, click on the button Unlock. All fields, which can be
changed, will be enabled. Please see the following table for explanations of the fields
and their options.
Field Description
Channel Current channel. This field cannot be changed if the Corinex Wireless
G USB Mini Adapter operates in the infrastructure mode and is con-
nected to an access point. Depending on the country, you may not
be able to use all channels. Please see the section Other for details
on the usage of channels.
Tx Rate Transmit data rate. This can be set to Auto, allowing the Corinex
Wireless G USB Mini Adapter to negotiate the data rate automatically
with the access point. If you prefer manual setting, you can select
any rate from 1 Mbps up to 54 Mbps.
SSID Identification of the network. Only two devices which have the
same SSID can communicate with each other. You can enable the
checkbox “any”, and this will force the Corinex Wireless G USB Mini
Adapter to connect to any access point it finds, choosing the best
signal strength and link quality.
Network
Type Infrastructure – the clients communicate with each other using
an access point. The access point can be connected to a wired net-
work, in order to provide connectivity to the Internet, to shared
items on a network, and printers.
Ad-Hoc – the clients communicate directly with each other.