Corinex Global ETS 300-826 - Manual (Page 12)

9
Using the Corinex Wireless G USB Mini Adapter
Corinex Wireless G USB Mini Adapter
2 Using the Corinex Wireless G USB Mini Adapter
2.1 Overview
Thank you for purchasing the Corinex Wireless G USB Mini Adapter!
The Corinex Wireless G USB Mini Adapter is an easy-to-install wireless adapter,
compliant with both 802.11b and 802.11g wireless standards, allowing your
computer to communicate with other wireless networking devices or wireless
networks. Additionally, it can act as a wireless access point, allowing wireless clients
to connect to your computer, and furthermore, to any wired network to which your
PC is connected.
The Corinex Wireless G USB Mini Adapter supports both USB 1.1 and 2.0 standards.
The only difference is the maximum data rate. When connected to a USB 1.1 port,
the USB Mini Adapter behaves as an 802.11b client/access point, allowing data rates
of up to 11 Mbps. When connected to a USB 2.0 port, it provides the full capabilities
of an 802.11g wireless device, allowing speeds of up to 54 Mbps. The adapter comes
with a convenient configuration utility, allowing fast and easy setup of all parameters
and functions.
2.2 Installation
The Corinex Wireless G USB Mini Adapter requires installation of the drivers and
the configuration utility in order to be detected by the operating system. Please
follow the steps below in order to successfully install the Corinex Wireless G USB
Mini Adapter drivers.
NOTE: Please don’t connect the Corinex Wireless G USB Mini Adapter to your
PC before step 4.
Step1
Insert the included CD into your CD-ROM drive. The installer should start
automatically. If it does not, please navigate to the root folder of the CD by clicking
on My Computer and then on the Compact Disc icon, and execute the file
setup.exe. The following screen will appear.