CyberHome Entertainment 1600 - Manual (Page 11)

12
OPERATION
Operation of rear panel
1 AC IN 100-230V: Mains socket for connecting to the mains supply (100-230V) with the
power cord. Plug the matching end of the power cord into the unit before
connecting the other end to the wall socket.
2 ANTENNA IN: Aerial input for connecting to the aerial.
3
COAXIAL OUTPUT: Digital coaxial audio output for connection to a digital audio device (ampli-
fier/receiver). Please note that the amplifier/receiver has to be compatible
to Dolby Digital, MPEG and/or PCM (for more information please refer to
the manual of your amplifier/receiver).
4
AUDIO R/L OUTPUT: Analogue 2-channel audio outputs (white/red socket) for connection to a
television, AV receiver, beamer or stereo system.
5 VIDEO OUTPUT: Composite video output (yellow socket) for connecting to a TV with a video
input (CVBS, composite video) by an audio/video cable.
6 REGION CODE: Indicates that the device is set to DVD region code “2”.
7
ANTENNA OUT: Aerial output for connecting to the TV.
8 EXT2 AUX: SCART socket 2 for connecting additional devices, e.g. DVD player, video
recorder, camcorder, satellite receiver, set-top box. To select, use the
“SOURCE” button and select “Video 1” or “S-Video”.
9 S-VIDEO OUTPUT: S-Video output for connection to a TV with S-Video input by an S-Video
cable. The S-Video output can be used instead of the video output, result-
ing in a higher video quality than standard composite video.
a EXT1 TO TV: SCART socket 1 for connecting to the TV.
1 1 2 3 4 5
7 8 9 10
6