Four seasons, Crossbar mounting bracket installation, Canopy installation – Casablanca Fan Company CASABLANCA Four Seasons III Gallery CEILING FAN 84GxxD User Manual

Page 4: Canopy hardware

Advertising
background image

4

CAUTION: To reduce the risk of

personal injury, use only the

mounting hardware provided with

the approved outlet box to install

the crossbar mounting bracket.

CROSSBAR MOUNTING BRACKET INSTALLATION

CEILING

WIRING

CROSSBAR

MOUNTING

BRACKET

FLAT

WASHER

GREEN

GROUND

WIRE

CEILING FAN

APPROVED

WIRING BOX

RIDGE

SIDE

DOWN

CANOPY INSTALLATION

CANOPY LOCK

WASHER

CANOPY

SCREW

CROSSBAR

MOUNTING

BRACKET

CANOPY

FOR FAN INSTALLATION OUTSIDE THE

USA GO TO PAGE 8

EXCLUDING MODELS ENDING IN ‘E’

CANOPY HARDWARE

CANOPY

CANOPY

HATCH

CANOPY LOCK WASHER (4)

CANOPY SCREW (4)

APPROVED

OUTLET

BOX

HARDWARE

NOTE: On sloped ceilings, align the
canopy opening towards the top or
room peak.

Proceed with installation as follows:

Step 1. Route the wires from the ceiling outlet box through
the crossbar mounting bracket center hole. Attach the bracket,
with ground wire and ridges down, to the ceiling fixture outlet
box with the mounting hardware included with the outlet
box.

Tighten the screws firmly by hand only, being careful not to
bend the bracket by over tightening.

Step 2. Attach the canopy to the crossbar
mounting bracket with three of the 8-32 x 2

1

/

4

"

long canopy screws and canopy lock washers.
Tighten the screw firmly by hand only.

FOUR SEASONS

III

Advertising