CyberHome Entertainment CH-DVD 452 - Manual (Page 18)

19
2. If you wish to hear sound through the TV, connect the stereo audio outputs
of your DVD player to the matching inputs of your TV using the red and white
connectors on the audio/video cable.
3. As this device has a fixed power cord, only plug the other end of the fixed
power cord into the wall socket.
4. Turn on the TV and the DVD-Player.
5. Select the corresponding video input on your TV. For this please refer to the
user manual of your TV. You should now see the DVD player’s splash
screen on your TV.
Audio/Video connection to a TV with SCART socket
If your TV has a SCART socket, you can optionally connect your device with the
TV over the SCART socket. The advantage is here an optimal picture quality.
Have the following cable ready:
1. SCART cable (optionally supplied)
1. Use a completely connected SCART cable, which is included in your acces-
sory (optional), to connect the SCART output of your DVD player to the
SCART socket of your TV.
2. As this device has a fixed power cord, only plug the other end of the fixed
power cord into the wall socket.
3. Turn on the TV and the DVD player.
4. If the TV offers the possibility to choose manually between RGB and CVBS,
you should set your TV to RGB in order to achieve a better picture quality. If
the DVD player is connected with the TV over the SCART cable, the TV
automatically switches to the DVD mode when you turn on the player (if the
TV supports this function).
AUDIO AND VIDEO CONNECTIONS
1
ᕢ
SCART CABLE
SCART INPUT
TV
ENG