CyberHome Entertainment CH-DVD 452 - Manual (Page 22)

23
Have the following cable ready:
1. Coaxial cable (not supplied)
Connect the coaxial digital output with the corresponding input on the AV
receiver by means of a coaxial cable (not included in your accessory). The opti-
cal digital audio output sends an encoded “RAW” digital audio signal to your
receiver for decoding. Please note that this connection is only possible if your
digital receiver is compatible to Dolby Digital, MPEG and/or PCM.
AUDIO AND VIDEO CONNECTIONS
1
A loud distorted noise comes from your loudspeakers:
In this case the receiver is not suitable for the digital audio format of the DVD
player. Playback with 6 channel digital surround sound is only possible, if the
receiver has a digital multi-channel sound decoder.
RECEIVER
COAXIAL DIGITAL INPUT
ENG