CyberHome Entertainment CH-DVD 452 - Manual (Page 19)

20
Audio/Video connection to a TV with S-Video and Stereo Audio
input
If your TV has an S-Video input, it is recommended that you use this Video con-
nection. The S-Video connector is distinguishable by its 4 pins, as shown on the
left side. S-Video separates brightness and colour signals, resulting in a higher
video quality than standard composite video. For the audio connection you can
use the red and white stereo audio in connectors of your TV.
Have the following cables ready:
1. S-Video cable (not supplied)
2. Audio/Video cable (optionally supplied; red and white plug)
1. Use the audio/video cable optionally included in your accessory to connect
the S-Video output of your DVD. Use a special S-Video cable (not included
in your accessory).
2. If you wish to hear sound through the TV, connect the stereo audio outputs
of your DVD player to the matching inputs of your TV Using the red and
white connectors on the audio/video cable.
3. As this device has a fixed power cord, only plug the other end of the fixed
power cord into the wall socket.
4. Turn on the TV and the DVD player.
5. Select the S-Video input on your TV. For this please refer to the user man-
ual of your TV. You should now see the DVD player’s splash screen on your
TV.
AUDIO AND VIDEO CONNECTIONS
1 2
S-Video socket
ᕣ
S
R L RED WHITE
TV
S-VIDEO INPUT
STEREO AUDIO
INPUT