Crate Amplifiers CMX62 - Manual (Page 11)

1 1
Applications: House of Worship:
In this example the mixer’s Main Outs are used for the sanctuary mix, the Aux outs are used for a platform mix, and a
mono signal is provided for the childcare room (or other remote location).
Connect signal cables between the mixer’s Main Left and Right jacks and the Input jacks of the sanctuary speakers’ stereo
power amp* (A). Connect another set of signal cable between the mixer’s Aux Out jack between the Input jack of the moni-
tor speakers’ power amp (B). Connect another signal cable between the mixer’s Mono Out jack and a powered speaker sys-
tem or an amplifier/speaker combination for the childcare room (C).
Connect speaker cables between the sanctuary power amp’s Speaker Outputs and the sanctuary speakers (D,E). Connect
another speaker cable between the monitor power amp’s Speaker Output and the platform monitor speakers (E,F).
Use the Main L/R fader to adust the level of the sanctuary speakers. Use the Aux controls to adjust the mix going to the
platform monitors. Use the Mono control to adjust the level of the signal sent to any remote location (childcare room, etc.).
*Two matched mono amplifiers may be used in place of the stereo power amplifier.
CMX62 Stereo Console Mixer