Crate Amplifiers CMX62 - Manual (Page 8)

Applications: Basic Mono Operation:
This example shows how the mixer and one stereo power amplifier* may be used to run both the house speakers
and the stage monitors.
Connect a signal cable between the mixer’s Mono jack and the power amp’s Channel 1 Input jack (A). Connect anoth-
er signal cable between the mixer’s Aux Out jack and the amp’s Channel 2 Input jack (B). A graphic equalizer may be
included in the signal chain as shown.
Connect a speaker cable between the power amp’s Channel 1 Speaker Output and the house speakers (C). Connect
another speaker cable between the amp’s Channel 2 Speaker Output and the monitor speakers (D).
Use the mixer’s Main L/R Fader to adjust the house volume level and the Aux controls to adjust the level of the mix
going to the monitors.
*Two mono amplifiers may be used in place of the stereo power amplifier.
Please note that the sample connections shown in the Applications sections are NOT absolute mandates as to how to connect your sound
system. They are merely intended to provide a springboard from which you may launch the system that will best suit your particular needs.
8
CMX62 Stereo Console Mixer