Crate Amplifiers CMX62 - Manual (Page 13)

1 3
Applications: External Effects and Recorders:
There are several ways to use the CMX62 with external signal processors (such as effects and delay units, limiters, etc.).
For example, any (or all) of the six mono channels may have its own processor patched in by use of the Insert jack (#3, page
4). Effects may also be patched in through the Aux or the Effects Out and Return jacks. Both the Aux and the Effects loops
will accommodate stereo as well as mono effects. The illustrations below show some of the different connections.
The signal level for the Aux/Effect sends is controlled by the setting of each channel’s Aux/Eff level controls. The Aux/Eff
Rtn level controls (#43/45, page 6) let you control how much of the effected signal is in the master mix.
Connecting a tape deck for recording and playback is accomplished as follows: Connect the Playback (Line Out) of the
deck to the mixer’s Tape In jacks. Connect the Record (Line In) of the deck to the mixer’s Tape Out jacks. The mixer’s Tape In
level control (#47, page 6) let you adjust the signal level from the tape deck. To avoid feedback keep the Tape In control at
minimum when recording!
CMX62 Stereo Console Mixer