Cobalt Networks 8321(-C) - Manual (Page 4)

Page 4 8310/8321 User Manual •••• (V 1.0)
Important Safety Instructions
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Warning
The safe operation of this product requires that a protective earth connection be
provided. A grounding conductor in the equipment's supply cord provides this
protective earth. To reduce the risk of electrical shock to the operator and service
personnel, this ground conductor must be connected to an earthed ground.
Use only power cords specified for this product and certified for the country of use.
Refer to the Product Power Cord Requirement Section that follows.
Do not defeat the safety purpose of the grounding-type plug. A grounding type plug
has two blades and a third grounding prong. The third prong is provided for your
safety. If the provided plug does not fit in to your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinching particularly at plugs,
convenience receptacles, and point where they exit from the apparatus.
Warning
Indoor Use: “WARNING – TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPERATUS TO RAIN OR MOISTURE”
Do not use this apparatus near water.
Do not block any ventilation openings. Install in accordance with manufacturer’s
instructions.
Do not install near heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long periods of
time.
Clean only with a dry cloth.
Warning
Refer all servicing to qualified personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug damage, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has been dropped.
Warning
Certain parts of this equipment still present a safety hazard, with the power switch in
the OFF position. To avoid electrical shock, disconnect all A/C power cords from
the chassis' rear appliance connectors before servicing.
Caution
To reduce the risk of fire, replacement fuses must be the same type and rating.
Caution
Service barriers within this product are intended to protect the operator and service
personnel from hazardous voltages. For continued safety, replace all barriers after
servicing.
Warning
This product contains safety critical parts, which if incorrectly replaced may present
a risk of fire or electrical shock. Components contained within the product’s power
supplies and power supply area, are not intended to be customer serviced and should
be returned to the factory for repair.