Clarion TB851P - Manual (Page 15)

280-8212-00
TB851P/TB853W
17
English
Changing the settings (ADJUST mode)
Select the FM modulator and RCA
audio output levels
∗ The factory setting is at “HIGH”.
• In TV mode, the FM modulator output is at
“HIGH”, even when set to “LOW” during TV
mode.
• Not displayed during VISUAL mode.
1. Select “AUDIO LEV” on the
ADJ_EXTERNAL screen.
2. Press the [ A] or [D] button to select the
“HIGH” or “LOW”.
• HIGH : Outputs signal at same level as the
audio from the car radio.
• LOW : Lowers the output level to -6dB.
(Set to LOW when audio is
distorted when set at HIGH.)
Set the LCD panel angle (in
airconditioning mode)
∗ The factory setting is at “0°”.
1. Select “TILT” on the ADJ_HVAC screen.
2. Press the [ A] or [D] button and select
“0°”, “30°” or “50°”.
Set the LCD panel operating time
(in airconditioning mode)
∗ The factory setting is at “10 sec”.
1. Select “TILT” on the ADJ_HVAC screen.
2. Press the [ A] or [D] button to select
“5sec”, “10sec” or “30sec”.
Set the beep tone used for button
operation
The beeping sound heard when pressing the
keys is called the beep tone.
∗ The factory setting is at “ON”.
1. Select “BEEP” on the ADJ_OTHER screen.
2. Press the [ A] or [D] button and select
“ON” or “OFF”.
Set the number of multiscreens (list
screen)
∗ The factory setting is at “12”.
1. Select “LIST” on the ADJ_OTHER screen.
2. Press the [ A] or [D] button and select “8”
or “12”.
Select the country (only on TB851P)
Setting the country name here, automatically
sets the video standard and audio frequency
band for that country.
Select the country name from:
• STANDARD • AUSTRALIA
• CHINA • HONG KONG
• NEW ZEALAND
1. Select “COUNTRY” on the ADJ_OTHER
screen.
2. Press the [ A] or [D] button and select the
country.
*TB851P/TB853W(09-20)E 05.2.25, 11:26 AM 17