Clarion TB851P - Manual (Page 6)

280-8212-00
TB851P/TB853W
3 8
TB851P/TB853W
280-8212-00 280-8212-00
TB851P/TB853W
4
English English English English
1. This unit is a precision mechanism. Even if
trouble occurs, never open the case,
disassemble the unit, or lubricate the rotating
parts.
2. TV broadcast reception
When receiving TV broadcasts, the strength
of the signals changes since the car is
moving, so receiving a clear picture may be
impossible in some cases.
• TV signals travel by line of sight, so recep-
tion is affected by buildings, mountains and
other obstacles.
• External factors such as electric train lines,
high voltage lines, and signal devices may
disturb the picture or cause noise.
∗ If the reception is poor, switch to a station
with good reception.
2. PRECAUTIONS
WARNING
For your safety, the driver should not watch the TV or operate the controls while driving.
Watching the TV while driving is prohibited by law in some countries. Also, while driving,
keep the volume to a level at which external sounds can still be heard.
INFORMATION FOR USERS: .
CHANGES OR MODIFICATIONS TO THIS
PRODUCT NOT APPROVED BY THE
MANUFACTURER WILL VOID THE
WARRANTY.
LCD panel/General items
For longer product service life, be sure to read the following cautions.
• Be sure to store the LCD panel inside the
main unit when parking the car outdoors for
long period of time. The LCD panel will
operate properly in a temperature range of 0
to 60˚C.
• Don’t allow any moisture or liquid from items
such as drinks or umbrellas to get on the unit.
Doing so may damage the internal circuitry.
• Do not disassemble or modify the set in any
way. Doing so may result in damage.
• Do not let cigarettes burn the display. Doing so
may damage or deform the cabinet.
• If a problem should occur, have the set
inspected at your store of purchase.
• Do not insert objects or poke into the space
between the LCD panel and the main unit
when the panel is tilted.
• Do not place anything on the display when the
panel is tilted.
• The remote controller might not work if the
remote control sensor is exposed to direct
sunlight.
• In extremely cold weather, the display
operation may slow and the display may
darken, but this is not a malfunction. The
display will work normally when the
temperature rises.
• Small black and shiny spots inside the LCD
panel are normal on LCD products.
• The LCD panel may stop temporarily when it
opens or closes, when the engine stops or
when it is cold.
Cleaning
• Cleaning the cabinet
Use a soft, dry cloth and gently wipe off the dirt. For tough dirt, apply some neutral detergent
diluted in water to a soft cloth, wipe off the dirt gently, then wipe again with a dry cloth.
Do not use benzene, thinner, car cleaner, etc., as these substances may damage the cabinet or
cause the paint to peel. Also, leaving rubber or plastic products in contact with the cabinet for long
periods of time may cause stains.
• Cleaning the LCD panel
The LCD panel tends to collect dust, so wipe it off occasionally with a soft cloth. The surface is
easily scratched, so do not rub it with hard objects.
Concerning the wide screen
• A wide-screen TV comes with a function for selecting various screen modes. If you select a screen
mode that differs from the picture ratio of the TV program or other software media, you will not be
able to view the original pictures as was originally intended. Bear this point in mind when selecting
the screen mode.
Superimpose
Appears for 7 seconds when the media source was switched to TV
mode.
CINEMA2: Screen size display
This was set to “FULL WIDE” prior to shipping. Besides Full
Wide, you can also select “CINEMA1” (cinema 1),
“CINEMA2” (cinema2), “NORMAL” (normal), and “WIDE”
(wide).
P.12 : Preset channel
66ch : Receivable channels
TV : Displays the media source name
Other displays
• AUTO STORE
: Appears during auto store operation in TV mode.
• PRESET MEMO : Appears during preset memory operation in TV
mode.
• VTR1, 2 : Appears in VTR mode 1 or 2.
• VISUAL1, 2 : Appears in Visual mode 1 or 2.
TV Display
Be sure to unfold and read the next page.
Ensuring safe driving
To ensure driving safety the TV video images are only shown when the car is stopped (parking
brake engaged). Always make sure the vehicle is stopped before watching the TV.
(A screen image as shown in the figure appears while the vehicle is moving and only the TV audio
can be heard.)
(screen while vehicle is moving)
System check
This unit has a system check function.
The system check display for this unit is displayed in the following cases. After this appears, press
the [POWER] button 1 times to return to normal operating mode.
System check appears:
• when power is turned on right after this unit was installed
• when external equipment was connected or removed
• when the power was cut off due to battery replacement, etc.
● List screen display
You can use the [P.LIST] button or [CH.LIST] button to display the preset channel list or the receivable
channel list.
Either 8 or 12 screens can be set on this multiscreen. See “Set the number of multiscreens”. (See
page 17.)
*TB851P/TB853W(03-08)E 05.2.24, 5:22 PM 1