Indicators, Power saving function, Indicators power saving function – Canon A610 User Manual

Page 22: P. 20

Advertising
background image

20

The indicators light or blink when the power button or the shutter
button is pressed.

z

Upper Indicator

z

Lower Indicator

This camera is equipped with a power saving function. The power
will shut off in the following circumstances. Press the power button
again to restore power.

* This time can be changed.

Indicators

Never do the following while an indicator is lit. These actions
may corrupt image data.
- Shake or jolt the camera
- Shut off the power, or open the memory card slot cover or

battery cover

Green:

Ready to shoot

Blinking Green: Image recording/reading/erasing/transferring

(when connected to a computer)

Orange:

Ready to shoot (flash on)

Blinking Orange:Ready to shoot (camera shake warning)

Yellow:

Macro mode/Manual focus mode/AF lock mode

Blinking Yellow: Focusing difficulty (camera beeps once)

Power Saving Function

Shooting Mode

Powers down approximately 3 minutes after
the last control is accessed on the camera.
The LCD monitor automatically turns off 1
minute* after the last control is accessed
even if [Auto Power Down] is set to [Off].
Press any button other than the power button
or change the camera orientation to turn the
LCD monitor back on.

Playback Mode
Connected to a Printer

Powers down approximately 5 minutes after
the last control is accessed on the camera.

Advertising