Canon A610 - Manual (Page 91)

89
Viewing
Imag
es o
n
a T
V
set
Viewing Images on a TV set
You can use a video-compatible television as a monitor to shoot or
play back images when it is connected to the camera with the
supplied AV Cable.
1
Turn off the Camera and the TV.
2
Connect the AV cable to the camera’s A/V
OUT terminal.
z Open the terminal cover by slipping
a fingernail under the left edge and
plug the AV cable in all the way.
3
Plug the other ends of the
AV cable to the VIDEO IN
and AUDIO IN jacks on the
TV.
4
Turn on the TV and switch it to Video mode.
5
Turn on the camera.
The video output signal can be switched (NTSC or PAL) to
accommodate different regional standards (
p. 27 ). The default
setting varies between regions.
If the video system is set incorrectly, the camera output may
not display properly.
VIDEO
AUDIO
IN
Yellow
Black
- NTSC: Japan, U.S.A., Canada, Taiwan and others
- PAL: Europe, Asia (excluding Taiwan), Oceania and others