Setting the camera to a custom color mode, P. 64 – Canon A610 User Manual
Page 66
64
3
Aim the camera so that the desired color
appears at the center of the LCD monitor
and press the button.
z
Only one color can be specified.
4
.
z
This completes the setting.
z
If you press the MENU button at this point, you will
return to the screen where you can select a My Colors
mode.
Setting the Camera to a Custom Color
Mode
This mode allows you to adjust the color balance for red,
green, blue and skin tones.
1
(Custom Color)
.
See Menus and Settings (
).
z
The default setting for color swap mode changes green
into white.
z
You may not obtain the expected results after color
input mode if you use the flash, or change the white
balance or metering settings.
z
The colors specified in the color swap mode are
retained even if the camera’s power is turned off.