Canon DIM-787 - Manual (Page 68)

Connecting to a Computer 68
Connecting to a Computer
PC Connection Diagrams
Connecting to a Computer
DV Terminal
Check the type and orientation
of the terminal and make sure
you connect the DV cable
properly.
USB Terminal
Open the terminal cover to
access.
Terminal on the Camcorder Connecting Cable
Terminal on the Connected
Device
1
Output connection (Signal Flow ) to a computer with a DV (IEEE1394) terminal or a
DV capture board.
DV Cable
(Commercially available)
4-pin
6-pin*
* Be careful to correctly insert the 6-pin plug into the DV terminal. Inserting it in the wrong direction
can result in damage to the camcorder.
2
Output connection (Signal Flow ) to a PC or PictBridge compatible printer with an
USB port.
USB Cable (Supplied)