Dell PowerEdge RAID Controller 5i User Manual

Page 48

Advertising
background image

46

Driver Installation

DUD Creation Procedure

Perform the following steps to create the DUD using the DKMS tool.

1 Install the DKMS-enabled megaraid_sas driver rpm package on a system running a SUSE Linux

operating system.

2 Type the following command in any directory:

dkms mkdriverdisk -d redhat -m megaraid_sas -v <driver version>
-k <kernel version>

This starts the process to create the megaraid_sas DUD image.

3 If you want to build the DUD image for multiple kernel versions, use the following command:

dkms mkdriverdisk -d redhat -m megaraid_sas -v <driver version>
-k <kernel_version_1>, <kernel_version_2>, ...

4 After the DUD image has been built, you can find it in the DKMS tree for the megaraid_sas driver.

NOTE:

The DKMS package supports both Red Hat Enterprise Linux and SUSE Linux Enterprise Server.

Installing SUSE Linux Enterprise Server Using the Driver Update Diskette

NOTE:

See "Creating a Driver Diskette" on page 39 for information about creating a driver diskette.

Perform the following steps to install SUSE Linux Enterprise Server (version 9 or 10) using the DUD.
See "Creating a Driver Diskette" on page 39 for information about creating a driver diskette.

1 Insert the appropriate SUSE Linux Enterprise Server (version 9 or 10) Service Pack (SP) CD in

the system.

2 Select Installation from the menu options.
3 Select the following key for the driver update disk, depending on the SUSE Linux Enterprise Server

version you are installing:

a

For SUSE Linux Enterprise Server 9, select <F6>.

b

For SUSE Linux Enterprise Server 10, select <F5>.

4 Press <Enter> to load the Linux kernel.
5 At the prompt Please insert the driver update floppy/CDROM, click OK.

The system selects the driver from the diskette and installs it. The system then displays the message
DRIVER UPDATE ADDED with the description of the driver module.

6 Click OK.

If you want to install from another driver update medium, continue with the following steps.

7 The system displays the message PLEASE CHOOSE DRIVER UPDATE MEDIUM.
8 Select the appropriate driver update medium.

The system selects the driver from the diskette and installs it.

Dell_PERC5_UG.book Page 46 Tuesday, February 13, 2007 6:02 PM

Advertising