Canon ELURA 50 - Manual (Page 114)

114
E
Using a Memory Card
You can merge separate images into one large panoramic scene using the supplied
software (PhotoStitch) on a PC. You can shoot a subject that won’t fit into a
single frame, such as a landscape, and stitch it together later.
PhotoStitch detects the overlapping portions of adjoining images and merges
them. When recording, try to include a distinctive item (landmark, etc.) in the
overlapping portions.
1. Turn the camcorder’s POWER switch to CAMERA and move the
TAPE/CARD switch to CARD.
2. Open the menu and select
\ STITCH AST.
• Select the direction with the CARD +/– button and press the SET button.
Press the CARD + button to move clockwise, press the CARD – button to
move counterclockwise.
3. Set the recording program and zoom on the subject.
• If necessary, set the focus manually and AE shift.
• After the first image, recording program, zoom and AE shift can not be
changed.
4. Press the PHOTO button to record the first image.
• Direction and number of recorded images will be shown on the display.
5. Orient the camcorder so that the second frame overlaps a small
portion of the first image and press the PHOTO button to take the
next image.
• Do not worry about minor discrepancies in the overlapped area because the
computer software can compensate for them when the images are merged.
• You can retake images by pressing the CARD – button to return to the
previous image.
• A maximum of 26 images may be recorded.
• Follow the same steps to shoot subsequent images in the sequence.
Recording Panoramic Images (Stitch Assist)
+
CAMERA CARD
STITCH AST
( 39)
Recording