Canon ELURA 50 - Manual (Page 152)

152
E
Additional
Information
Troubleshooting
Cause and/or what to do about it
• The camcorder is not set to the
appropriate mode ( 19, 29).
• The cassette is not loaded or is set for
erasure prevention ( 17-18).
• The cassette has reached the end.
• The power source is not properly
connected, or the battery pack is
exhausted or not properly attached
(
13-16, 146).
• The function cannot be used in that
recording program ( 57).
• The camcorder was in record pause
mode for more than about 5 minutes
(
19, 106, 162).
• The battery pack is exhausted
( 15-16, 146).
• The battery pack’s power is exhausted.
Recharge or change to a new battery
pack (
15-16).
• The cassette is not loaded or is set for
erasure prevention ( 17-18).
• The cassette has reached the end.
• The camcorder is not set to the
appropriate mode ( 19, 29).
• You are attempting to play back or
record copyright protected material
(
87).
• The video heads are badly
contaminated ( 149).
Refer to this checklist first if you have any problems with your camcorder.
Possible explanations are given for each problem on the list — turn to the page
numbers in parentheses for more information.
Make sure that the camcorder is properly connected if you are using it with a TV
or VCR. Consult your dealer or service outlet if problems persist.
Recording/Playback
Problem
? Nothing happens when I press the
buttons.
? The camcorder turned itself off.
? The cassette compartment stopped
mid-operation while
loading/unloading a cassette.
? The start/stop button doesn’t work.
? There’s no picture in the display.
? There’s a blank blue screen in the
display.