Canon ELURA 50 - Manual (Page 70)

70
E
Using the Full
Range of Features
To turn it on, open the menu and select VCR SET UP. Then select
WIND SCREEN, set it to ON and close the menu.
• WS
O
is shown in the display when you turn the wind screen on.
Notes:
• Low sound may be reduced together with the wind noise. We recommend
turning off the wind screen for normal recordings.
• The wind screen function cannot be turned on/off during recording.
• The wind screen can be used for audio dubbing with the built-in microphone in
TAPE PLAY (VCR) mode as well as recording (when AUDIO DUB. is set to
MIC. IN in VCR SET UP submenu).
• The wind screen does not operate when an external microphone is connected to
the MIC terminal.
Wind screen
WIND SCREEN••OFF VCR SET UP
( 39)
+ , + PLAY
(VCR)
TAPE CAMERA TAPE
The camcorder has an automatic wind screen to prevent wind noise from
interfering with the sound track. Make sure it’s off when you want the
microphone to be as sensitive as possible. Use the wind screen when recording in
windy places such as the beach or near buildings.