CFM Corporation 3405BG - Manual (Page 10)

10
����
���������������������
����
Assembly Step 6
1. Align the carry handle with the corresponding
holes on the side of the cabinet. The handles
must be positioned upright with the bolt holes on
the bottom.
2. Insert the bolts from the outside and thread the
lock washers and nuts from inside the cabinet.
3. Firmly tighten the nuts.
4. Complete steps for both sides of the cabinet as-
sembly.
Tools needed:
Hardware Bag
Locate these parts:
Phillips head
screwdriver
1/2” Wrench
1/4-20 Nuts
8 required
1/4 Lock Washers
8 required
1/4-20 x 5/8” Bolt
8 required
D
Hardware:
2 Carry Handles