Hard drive, Replacing the hard drive – Dell Inspiron 700M User Manual
Page 15
Back to Contents Page
Hard Drive
Dell™ Inspiron™ 700m Service Manual
Returning a Hard Drive to Dell
Replacing the Hard Drive
1.
Remove the
battery
.
2.
Loosen the three captive screws that secure the hard drive to the bottom case.
3.
Loosen the two captive screws on the hard drive securing bracket and remove the bracket.
4.
Pull the hard drive out of the computer using the pull tab.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE:
Disconnect the computer and any attached devices from electrical outlets.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE:
Read "
Before Working Inside Your Computer
" before performing the following procedure.
NOTE:
Rubber grommets secure each screw to the hard drive so that you do not need to completely remove the screws.
1 captive screws (3)
2 hard drive cover
NOTICE:
When the hard drive is not in the computer, store it in protective antistatic packaging. See "Protecting Against Electrostatic Discharge" in the
Product Information Guide.