Adding a mini pci card – Dell Inspiron 700M User Manual

Page 36

Advertising
background image

 

9.

Connect the modem cable to the modem.

 

10.

Align the modem with the screw hole and press the modem into the connector on the system board.

 

11.

Install the two M2 x 5-mm screws to secure the modem to the system board.

 

12.

Replace the cover.

 

Adding a Mini PCI Card

If you ordered a Mini PCI card with your computer, the card is already installed.

 

 

1.

Ensure that the work surface is flat and clean to prevent scratching the computer cover.

 

2.

Save and close any open files, exit any open programs, and

shut down the computer

.


 

3.

Disconnect the computer from the electrical outlet.

 

4.

Wait 10 to 20 seconds and then disconnect any attached devices.

 

5.

Remove the

battery

, any installed PC Card or blanks, and devices.

 

6.

Turn the computer over.

 

7.

Loosen the two captive screws on the cover, and remove the cover.

1 M2 x 5-mm modem screws

(2)

2 modem

3 modem cable connector

4 system board connector

NOTICE:

The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card.

CAUTION:

Before performing any of the procedures listed below, read and follow the safety instructions in the Product  Information Guide.

NOTICE:

Read "

Before Working Inside Your Computer

" before performing the following procedure.

NOTICE:

Handle modules and cards by their edges, and avoid touching pins and contacts. Ground yourself by touching a metal connector on the back of

the computer. Continue to ground yourself periodically during this procedure.

Advertising