Dell Inspiron 700M - Manual (Page 23)

8. Lift the ZIF connector, and disconnect the palm-rest flex cable from its ZIF connector on the system board.
9. Lift the palm rest up and out of the computer.
Replacing the Palm Rest
To aid with proper flex cable connection, a locator line has been added near the end of the palm-rest flex cable. When replacing the palm-rest flex cable, press
the cable into the connector until the line aligns with the system board and hold it steady while you snap the ZIF connector down. (The locator line may
reappear after the connector is closed, which should not indicate a problem with the connection.)
Back to Contents Page
1 palm-rest flex cable 4 M2 x 5-mm screws (2)
2 ZIF connector 5 palm-rest
3 ZIF connector tabs (2) 6 bottom case