Dell 1250c Color Laser Printer - Manual (Page 153)

Troubleshooting 151
Auger mark
Action Yes No
1 If the printer is installed in a high altitude
location, set the altitude of the location.
1 Launch the Tool Box, and click Adjust
Altitude on the Printer Maintenance tab.
2 Select the value close to the altitude of the
location where the printer is installed.
Is them problem recovered?
The task is
complete.
Contact Dell.
Action Yes No
1 The toner cartridges may be low or need to be
replaced. Confirm the amount of toner in each
toner cartridge.
1 Check the toner level in the Status tab in the
Status Monitor.
2 Replace the toner cartridges as necessary.
Is the problem recovered?
The task is
complete.
Go to action 2.
2 Start Developer Stir Mode.
1 Launch the Tool Box, click Developer Stir
Mode on the Diagnosis tab.
2 Click the Start button.
Is the problem recovered?
The task is
complete.
Contact Dell.