Dell 2330d/dn Mono Laser Printer - Manual (Page 48)

Installing Optional Hardware
Installing the 550-Sheet Optional Drawer
Installing an Optional Memory Card
Installing the 550-Sheet Optional Drawer
An optional drawer attaches under the printer. A drawer consists of two parts: a tray and a support unit. Your printer supports
one optional drawer that holds up to 550 sheets of paper.
1. Turn the printer off.
2. Unpack the drawer, and remove any packing material.
3. Place the drawer in the location you have chosen for your printer.
NOTE: If you have optional memory to install, leave clearance on the right side of the printer.
4. Align the holes in the printer with the positioning posts on the drawer, and lower the printer into place.
5. Turn the printer back on.
6. In Windows Vista™:
a. Click ® Control Panel.
b. Click Hardware and Sound.
c. Click Printers.
In Windows ® XP and 2000:
CAUTION: If you are installing a drawer after setting up the printer, turn off the printer, and unplug the
power cable before continuing.