Dell 2330d/dn Mono Laser Printer - Manual (Page 57)

If the toner cartridge is not installed, install it.
If the toner cartridge is installed, remove it and install a new toner cartridge.
31 Defective Toner Cartridge
Remove and install a new toner cartridge.
32 Unsupported Toner Cartridge
Remove the specified toner cartridge, and then install a supported one.
34 Short Paper
Ensure that the paper you loaded is large enough.
Check for a paper jam.
To clear the message and continue printing, press the Back button . The remaining pages of the print job may not
print correctly.
To cancel the print job, press the Cancel button .
35 Insufficient Memory to Support Resource Save Feature
To ignore Resource Save and continue printing, press the Back button . The current job may not print correctly.
To cancel the print job, press the Cancel button .
To enable Resource Save after receiving this message, make sure the link buffers are set to Auto, and then exit the
menus to activate the link buffer changes. When Ready appears, enable Resource Save.
For more information on how to enable Resource Save, see Setup Mode .
To prevent this error in the future, install additional memory.
37 Insufficient Memory to Collate Job
The printer memory does not have enough free space to collate the job.
Press the Back button to print the portion of the job already stored and begin collating the rest of the print job. The
current job may not print correctly.
To cancel the current print job, press the Cancel button .
To prevent this error in the future:
Install additional memory.
Simplify the job. Reduce the complexity of the page by reducing the amount of text or graphics on the page and