Dell 2330d/dn Mono Laser Printer - Manual (Page 84)

Dell 2330dn Laser Printer — Attached to a Network
Setting the paper size and type for the printer is done through the Dell Printer Configuration Web Tool.
NOTE: Configuring paper trays through the Dell Printer Configuration Web Tool is available only on the Dell 2330dn
Laser Printer.
1. Type your network printer's IP address in your Web browser.
NOTE: If you do not know your printer's IP address, print a network setup page, which lists the IP address. For
more information see Printing a Network Setup Page .
2. When the Printer Status page opens, select Printer Settings in the left column.
3. From the Printer Settings page, select Paper Menu.
4. Select Paper Size.
5. Select the paper size you have in each tray.
6. Click Submit.
7. Select Printer Settings in the left column.
8. From the Printer Settings page, select Paper Menu.
9. Select Paper Type.
10. Select the paper type you have in each tray.
11. Click Submit.
Loading the 250-Sheet and 550-Sheet Paper Trays
Follow these instructions to load paper in the 250-sheet and 550-sheet paper trays.
1. Remove the tray.
2. If you are loading legal or folio-size paper, you must adjust the paper tray to accommodate the larger paper.
a. Press down on the latch at the back of the tray.
b. Expand the tray until the extender locks into place.