Canon MP800R - Manual (Page 26)

24 Chapter 1 Before Printing
z Continuous printing on the same type/size of paper by using both the
Auto Sheet Feeder and Cassette together
If the Auto Sheet Feeder or Cassette runs out of paper, the paper source automatically switches
to the other one. This is useful for printing onto a large volume of paper. To use this feature, you
can select this setting with the printer driver beforehand.
(A) If the Auto Sheet Feeder runs out of paper, the paper source automatically changes to the
Cassette.
„ Changing the Paper Source
Before printing, confirm that the location where you have loaded paper is selected as a paper
source. Press [Feed Switch] to change the paper source.
(A) Auto Sheet Feeder Lamp
(B) [Feed Switch]
(C) Cassette Lamp
Important
z This feature can be used only when printing from a computer.
z This feature can be used only when paper of the same size and media type are loaded in
the Cassette and Auto Sheet Feeder.
Note
z For information on page size, media type, and paper support load limit for Auto Sheet
Feeder or Cassette, see “Recommended Paper and Requirements” on page 20 .
z For information on the printer driver settings, refer to the Printer Driver Guide.
(A)
(A)
(B)
(C)