Canon MP800R - Manual (Page 39)

Chapter 1 37 Before Printing
„ Print Setting Items
Each tab contains the following setting items. To change the tab, use [ ] to select the tab and
use [ ] or [ ].
z Copy mode
This section describes the Settings screen for Copy mode.
Tab 1
You can specify the paper settings for printing or print quality.
(1) You can specify the page size.
8.5" x 11" (215.9 x 279.4), A4, B5, A5, 4" x 6" (101.6 x 152.4), 5" x 7" (127 x 177.8),
Credit card
(2) You can specify the media type.
Plain paper, Photo Paper Pro, Photo Plus Glossy, Matte Photo Paper, Glossy Photo
Paper
(3) You can adjust image quality according to the documents you want to copy.
Fast, Standard, High
(4) You can specify the reduction or enlargement method.
Same magnification, Preset ratio, Zoom (25 - 400%), Fit-to-page
Tab 2
You can specify auto intensity.
(5) This function automatically adjusts the intensity of the document on the Platen Glass.
Auto intensity ON, Auto intensity OFF
Note
Depending on the functions specified in the Copy, Memory card, or Photo/film mode, some
setting items cannot be specified in combination.
Important
Some page sizes cannot be loaded in the Cassette and should be loaded in the Auto
Sheet Feeder.
Note
Some of these are not available depending on the country of purchase.
Note
z <Fast> can be selected when <Plain paper> is selected as the media type.
z When using <Fast> with media type set to <Plain paper>, if the quality is different from
that expected, select <Standard> or <High> and try copying again.
z Select <High> to copy in grayscale. Grayscale renders tones in a range of grays
instead of black or white.
(1)
(2)
(3)
(4) (5)