Clarion VMA770 - Manual (Page 10)

0
English
Note :
• If you reset the options and the monitor was set to source  (AV), the monitor
reverts to the default setting of AV. If there is no active video source on AV,
the screen may go dark. Press SOURCE to switch the monitor back to AV.
• The reset settings only valid for the Tint, Color, Brightness, Contrast, Volume
that setting those parameter back to default value 5, and set to IR CHA,
AUTOPOWER ON.
Remote IR Function
The LCD monitor comes with an IR receiver that works with Clarion remote control
devices. Aim the remote control at the IR receiver during use.
Note:
The IR receiver only functions with selected Clarion multimedia equipment.
Connecting a video source
The video sources you are using may be preinstalled for you, or your configuration may
be designed to allow you to change devices.
For example, returning from a day at the beach, you may disconnect your game from
the game port and connect your camcorder to view the video you just shot.
CAUTION ! Always take care when disconnecting and connecting electronic
devices.