Clarion VMA770 - Manual (Page 13)


English
Installing the monitor
Flush mounting in the headrest
You may use the included bezel to mount the monitor.
1. Ensure that you will have sufficient clearance for the monitor and its rear-located
wiring harness.
2. Cut the opening.
3. Route the pigtail cable end of the wiring harness into the opening from the rear out
the front.
4. Insert the bezel and route the wiring harness through the opening in the rear.
5. Firmly attach the bezel to the mounting surface and/or to the interior of the mounting
surface.
Mounting tabs
Mounting screw holes
Wire harness opening
6. Connect the wiring harness to the monitor, and tuck the excess wiring harness
length carefully out of the way behind the bezel.
Press edges to
fit monitor into
bezel, do not
press monitor
screen
Monitor
Bezel
Spring clips
lock the
monitor in
place